The APT Energy displays (shown above in blue and orange) can interfere with the pitch trace's visibility. You can reduce these displays.


To do this, LEFT CLICK on the Guide or Dub's track Display's Scaling Selector (showing "Audio" in the image below left) to bring up the list shown below right and select "Energy".


APT Display Scale SelectorAPT Scale Display List


This will display "Energy" in the track Display's Scaling Selector.


Track Scale Display ControlClick the Scale Display button (shown in blue in above left image) to bring up the Slider (shown right) for adjusting the Vertical scale of the selected display.

Lower the slider to lower the Energy display.


If the SHIFT key is held down while moving the slider, the scaling will be applied to all the tracks with Energy displays as shown below (where the slider is part way down).


APT Energy scaled lower


When the slider reaches the bottom, the Energy displays will be reduced.


Next topic: Bring the pitch traces into view