There are two ways to open a Process Control Panel.


  1. If a Process Control Block is selected (green), pressing the P key will open the Control Panel (shown right) for the selected Process (this is the fastest method)
    OR
  2. LEFT CLICK on the Control Panel button Process Control Open Buttonin either the Guide or Dub Process Control Block.


The Process Control Panels differ somewhat depending on the Process.
For details see the individual Process topics.


If the Pinned control is turned ON, the "pinned" panel will stay open. Multiple "Pinned" panels can remain open for comparison, but the Control Panel for the selected process will have a green-tinted name bar at the top.


To close the panel, either press the P key, or click the "X" button top left in the Control Panel, or click the Process Control Open Buttonbutton (once or twice - depending on what has been previously selected).


Next topic

Related topics:

New Process window

Changing input and output tracks

Process Control Track

Setting a Process Control Block

Process versions

Adjusting APT settings

Adjusting Doubler settings

Adjusting Warp settings